The auxiliary cylinder is an auxiliary installation device for both built-in and external mounting of pressure-resistant tubular sensors. It enables users to install the sensor quickly, efficiently and reliably with minimal modification to the original equipment. The auxiliary cylinder maximizes protection for the sensor against external environments (oil, corrosive liquids, moisture, high temperatures), thus extending its service life.
Technical Specifications Table
| |
Signal output | 4-20mA / 0-5V / 0-10V / RS485 / SSI / CANOpen / (analog dual output) / (RS485 + analog dual output), etc |
Measure the trip | The 25-5000mm is optional |
Resolution | 16Bit DA |
Non-linearity | +0.1 mm (range ≤ 250 mm) / ±0.02% F.S. (range > 250 mm) |
Repeatability | <±0.002%F.S. (minimum ±2 5um) |
Maximum Reciprocating Speed | 10 m/s |
Update Time | 2 ms (for ranges 1m < L < 2m) / 2 ms (for ranges 2m < L < 3m) |
Operating Temperature | -40°C to +100°C |
Humidity & Dew Point | 90% RH, no condensation allowed |
Protection Rating | IP67 |
Pressure Resistance | 35 MPa (continuous) / 70 MPa (peak) |
Input Voltage | +24 Vdc ±20%, Insulation Resistance >10 MΩ, Dielectric Strength 500 V |
Operating Current | <50 mA (varies with range) |
Polarity Protection | Up to -30 VDC |
Overvoltage Protection | Up to 36 VDC |
Insulation Resistance | 500VDC |
Power Consumption | < 1 W |
Mounting Method | Articulated mounting |
Cable Length | 1 meter |
Housing Material | 304 stainless steel |
Single-end fisheye type mounting dimension drawing:

Outline Dimension Drawing of Single-end Fisheye Type:

Integrated Articulated Type mounting dimension drawing:

Integrated Articulated Type Outline Dimension Drawing:

Mounting Dimension Drawing of Integrated Single-end Fisheye Type

Outline Dimension Drawing of Integrated Single-end Fisheye Type

Auxiliary Cylinder Mounting Fixture Dimension Drawing

Tel.:19842768572
Hotline:18617045403
E-mail:577595125@qq.com
Add:No. 206 South Seven Road, high-tech Zone, Yuehai Street, Nanshan District, Shenzhen City
WehChat