RP Series (Slider Type)

RP Series (Slider Type)

Magnetostrictive Displacement Sensor
Features:
■ External slider design, enabling easy installation.
■ IP67 protection rating, resistant to oil and contamination.
■ Floating magnet, allowing a maximum vertical sensing gap of 12 mm.
■ Absolute position output with no homing required.
■ Non-contact measurement, wear-free operation.
■ Non-linearity: <±0.02% of full scale.
■ Easy diagnostics, with LED status indicators for real-time monitoring.

RP Series aluminum profile provides flexible and simple external installation mode, which is suitable for stroke or position detection of linear motion mechanism, and can also be used for external position detection of hydraulic cylinder

Technical Specifications Table  

 Signal output

4-20mA / 0-5V / 0-10V / RS485 / SSI / CANOpen / (analog dual output) / (RS485 + analog dual output), etc

Measure the trip

The 0-7000mm is optional

Resolution

16DA  /  16bit    /  2524,26Binary/Cray

Non-linearity

<±0.02%F.S. (minimum ± 20um)

 Repeatability

<±0.001%F.S. (minimum ± 5um)

Maximum Reciprocating Speed

10 m/s

Update Time

1 ms (for ranges 1m < L < 2m) / 2 ms (for ranges 2m < L < 3m)

Operating Temperature

 -40°C to +85°C

Humidity & Dew Point

90% RH, no condensation allowed

Protection Rating

IP68

Input Voltage

24VDC±20%

Operating Current

<60 mA (varies with range)

Polarity Protection

Up to -30 VDC

Overvoltage Protection

Up to 36 VDC

Insulation Resistance

500VDC

Mounting Orientation

 Any

Install thread

Standard: M18×1.5 thread / Customizable: M20×1.5 thread

Cable Termination

Waterproof connector / Aviation plug

Cable Length

1 meter

Housing Material

304 stainless steel


■ RP product profile dimension diagram

image.png


image.png■ Schematic diagram of the RP installation








Shenzhen Juzhun Sensor Technology Co. , Ltd. All rights reserved | 粤ICP备2024266441号粤ICP备2024266441号-1