KPC-Series

KPC-Series

RECTILINEAR DISPLACEMENT TRANSDUCER WITHCYLINDRICAL CASE
Features:
• The transducer is designed to satisfy extreme applicative demands in terms of mechanical strength.
• The 36 mm diameter rod, large steel joints, and reinforced structure make this series mechanically ideal for metalworking, woodworking, and ceramics.
• Installation is simplified by the lack of electrical signalvariation at output outside theoretical electrical stroke.
• The structure based on self-aligning and weight-bearing ball joints permits assembly with free movement of the transducer axle


Useful electrical stroke50/100/130/150/175/200/225/275/300/360/375/400/450/500/600/750/800/850/900/1000/1100/1150/1250
Independent linearity0,1%F.S
ResolutionInfinite
Repeatability0.01 mm
ProtectionIP65
Displacement speed≤ 5 m/s
Displacement force≤ 15 N
Life> 25x106  m strokes,or
> 100x106  operations, whichever is less
(within C.E.U.)
Vibrations5...2000Hz, Amax =0.75 mm amax. = 20 g
Shock50 g, 11ms.
Tolerance on resistance± 20%
Recommended cursor
current
< 0.1 µA
Maximum cursor current10mA
Max. applicable voltage60V
Electrical isolation>100MΩ at 500V=, 1bar, 2s
Dielectric strength< 100µA at 500V~, 50Hz, 2s, 1bar
Dissipation at 40°C
(0W at 120°C)
3W
Actual Temperature Coeffi-
cient of the output voltage
≤ 1.5 ppm/°C
Working temperature-30...+100°C
Storage temperature-50...+120°C
Case materialAnodised aluminium Nylon 66 G
Control rod materialStainless steel AISI 303
Fixing2 selfloading and selfaligning ball-joints

Important:  all the data reported in the catalogue linearity, lifetime, temperature coefficient are valid for a sensor utilization as a ratiometric device

 with a maxcurrent across the cursor Ic ≤ 0.1 μA.

KPC-1.jpg



Shenzhen Juzhun Sensor Technology Co. , Ltd. All rights reserved | 粤ICP备2024266441号粤ICP备2024266441号-1